Page Comparison

10 21 13 Interior Toilet Compartments

Toilet Room Partitions:

1. All toilet partitions, compartments, screens, etc. shall be ceiling hung as a first option or floor mounted (where applicable during a renovation).  All new building construction shall be ceiling hung.
2. Urinal partitions shall be wall hung, for both new construction and renovations.
3. Toilet partitions shall be plastic laminate (high density polyethylene (HDPE).
   1. Doors, Panels, and Pilasters shall be constructed from HDPE.  HDPE shall be fabricated from polymer resins compounded under high pressure, forming a single component which is mold, mildew, and odor resistant; waterproof, nonabsorbent, and have a self-lubricating surface that is scratch and dent resistant; and resists marks from pens, pencils, markers, and other writing instruments.  Doors, Panels, and Pilasters shall be 1" thick with all edges rounded to a radius.
      1.  Panel Color: Shall be approved by University Architect
      2. Texture: Shall be approved by University Architect
4. Door and Panel height shall be a minimum of 55 inches
5. Partitions and Screens shall be mounted at 14 inches minimum above finished floor.
   
   

Hardware:

1. Pilaster Shoes: 3 inches high, type 304, 20 gauge stainless steel with satin finish secured to pilasters with a stainless steel tamper resistant torx head sex bolt.
2. Continuous Brackets: Shall be a minimum of 54 inches high, continuous, double ear and/or single ear, heavy-duty 6463-T5 aluminum with clear anodized finish OR type 304, 20 gauge stainless steel with satin finish.  Brackets shall be fastened to pilasters with stainless steel tamper resistant torx head screws and fastened to the panels with stainless steel tamper resistant torx head sex bolts.
3. Stirrup Brackets: Shall be double ear and/or single ear, heavy-duty 6463-T5 aluminum with clear anodized finish OR type 304, 20 gauge stainless steel with satin finish.  Brackets shall be fastened to pilasters with stainless steel tamper resistant torx head screws and fastened to the panels with stainless steel tamper resistant torx head sex bolts.
4. Headrails: Shall be heavy-duty extruded 6463-T5 alloy aluminum with clear anodized finish and have an anti-grip design.  Fasten to headrail brackets with stainless steel, tamper resistant torx head hex bolt and fasten at the top of the pilaster with stainless steel, tamper resistant torx head screws.
   1. Headrail Brackets: Shall be 20 gauge stainless steel with satin finish.  Secured to wall with stainless steel tamper resistant torx head screws.
5. Door Strike/Keeper: Shall be 3 inches, type 304, 20 gauge stainless steel with satin finish with emergency access.  Secured to pilasters with stainless steel tamper resistant Torx head sex bolts.
6. Latch Mechanism: Universal, emergency, heavy-duty extruded 6463-T5 alloy aluminum.  Latch and housing to have a bright dip anodized finish.  Slide bolt and button to have a black anodized finish OR heavy-duty type 304 stainless steel.  The latch and housing to have a bright finish.  The slide bolt and button to have a black anodized finish.
7. Hingers:
8. Each door shall be supplied with:
   1. In-swing doors shall be supplied with one door pull.
   2. Out-swing handicapped doors shall be supplied with two door pulls.
   3. One 3 inch magnetic doorstop with catch from Everbilt.  Attach catch/bumper on door using screws.  Attach doorstop to either wall or partition using screws.  Doorstop can/will be used as coat hook.  Color: Satin Nickel

General Notes:

1. Not all hardware listed above will be needed or used, pending on install method.
2. Approved manufacturers: Scranton Products, Bradley Corp, or Hadrian.
3. Partition materials shall meet or exceed the following requirements:
   1. Hard to Scratch: Tested to ASTM D2197- first visible scratch at 8 lbs., 8 oz
   2. Graffiti Removal: Tested to ASTM D6578
   3. Hard to Dent: Tested to ASTM D2794 up to 192 in-lbs
   4. Antimicrobial Touch Surface: Hardware touch surfaces shall be manufactured from substrates that are registered with the U.S. EPA to kill specific bacteria tested according to U.S. EPA protocols.
   5. Fire Resistance: Partition materials shall comply with the following requirements, when tested in accordance with ASTM E 84:

      1.  Class A flame spread/smoke developed rating.

      2. Class B flame spread/smoke developed rating.

      3.  National Fire Protection Association (NFPA) 286: Pass.

      4.  International Code Council (ICC): Class B

Warranty:

1. Manufacturer guarantees its plastic against breakage, corrosion, and delamination under normal conditions for 25 years from the date of receipt by the customer.  If materials are found to be defective during that period for reasons listed above, the materials will be replaced free of charge.

Any exceptions/substitutes must be approved by the University Architect

10 28 13 Toilet Accessories

.01 Toilet Room Accessories

1. Toilet Accessories are stocked at PSU General Stores (PSGS) (verify availability).
   1. Bathroom Tissue Dispenser (preferred): Kimberly-Clark Professional Jumbo Roll Toilet (JRT) Twin Roll Unit.  Color: Smoke Gray.  PSGS # 9981217
   2. Bathroom Tissue Dispenser: Kimberly-Clark Professional Jumbo Roll Toilet (JRT) Single Roll Unit.  Color: Smoke Gray.  PSGS # 9981163
   3. Soap Dispenser (preferred): GOJO Push Paddle Foam Soap Unit, 1250 ML, Imprinted with “Penn State"  Color: Black.  PSGS # 9981118
   4. Soap Dispenser: GOJO Push Paddle, Foam Soap Unit, 2000 ML, Imprinted with “Penn State"  Color: Black.  PSGS # 9981127
   5. Paper Towel Dispenser (preferred): Kimberly-Clark Professional Sanitouch Manual Hard Roll Unit.  Color: Smoke Gray.  PSGS # 9981172
   6. Paper Towel Dispenser (high volume): Tork Elevation Peakserve High Capacity, Hand Towel Unit.  Color: Black.  PSGS # Z11690098
   7. Tampon/Napkin Dispenser: Hospeco Evogen EV1-Free, Metal, Dual Pad/Tampon Unit.  Color: White.  PSGS # 7406888
   8. Tampon/Napkin Waste: CleanContain, Regular Base, 3.5 gallon, with base disc and wall mount bracket.  Color: White.  PSGS # 1797930
      1. Lid (sold separate): CleanContain Cartridge, Includes courtesy flap and liner bag.  Color: White.  PSGS # 1795356
   9. Waste Receptacle: Rubbermaid Untouchable 22 Gallon Round Plastic Unit.Color: Gray.  PSGS # 2044638
   10. Grab Bars: Bobrick, 1-1/2” diameter tubing in stainless steel with satin finish and peened surface for slip-resistance.  Each cover snaps over mounting flange to conceal mounting screws.  Blocking shall be provided in-wall by contractor and use mounting kit 252-30.
       1. 18”  B-6806.99 x 18
       2. 36”  B-6806.99 x 36
       3. 42”  B-6806.99 x 42
   11. Mirror: Bobrick, 18” W x 30” H one-piece, welded, type 304 stainless steel frame with theft-resistant wall mounting.  Bobrick # B-290 1830.
   12. Baby Changing Station: Koala Kare KB300 Horizontal Surface-Mounted unit, constructed of injection-molded polypropylene with Microban antimicrobial additive embedded into the bed surface with unibody steel chassis and include child protection straps and concealed pneumatic cylinder.  Color to be selected by University Architect.  Station shall meet or exceed the following requirements:
       1. ASTM F2285-04(16) Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use.
       2. ANSI Z535.4 Product Safety Signs and Labels.

*Items J, K, & L are not available from PSGS and must be purchased from an outside vender*

General Notes:

1. Hand Sanitizer will be provided by PSU Janitorial Services.  If provided, dispenser will be located outside of the restroom.
2. Toilet seat covers are not available upon request and will not be serviced by Penn State Janitorial if installed.
3. Any exceptions/substitutions must be approved by the Penn State Janitorial Supervisor.
4. All accessories shall be installed and meet local codes and the Americans with Disabilities Act (ADA).
5. Toilet accessories listed above are based on items manufactured by:
   1. Bobrick Washroom Equipment   518-877-7444                           www.bobrick.com
   2. Kimberly-Clark Professional       800-241-3146              www.kcprofessional.com
   3. GOJO Industries                           800-321-9647                               www.gojo.com
   4. Koala Kare Products                    888-733-3456                     www.koalabear.com
   5. CleanContain                                404-840-6102                 www.cleancontain.com
   6. Hospeco                                         800-321-9832                         www.hospeco.com
   7. Tork USA                                       866-722-8675                          www.torkusa.com
   8. Penn State General Stores         814-863-0317        www.generalstores.psu.edu