02 00 01 General Owner Requirements and Intent
.01 Storm and Sanitary Sewer cross connections
- University has identified buildings having improper cross-connections between the sanitary and storm drainage systems. Design Professionals are responsible for addressing these conditions and making legal connections to the drainage systems.
- Contact Engineering Services for further information.
02 10 00 UNASSIGNED
02 20 00 ASSESSMENT
02 30 00 SUBSURFACE INVESTIGATION
02 40 00 DEMOLITION AND STRUCTURE MOVING
02 50 00 SITE REMEDIATION
02 60 00 CONTAMINATED SITE MATERIAL REMOVAL
02 70 00 WATER REMEDIATION
02 80 00 FACILITY REMEDIATION
02 81 00 TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS
| Document | Version Date | Description |
|---|---|---|
| Mercury Information | This links to a site provided by Penn States Environmental Health and Safety department. It should be referenced by anyone working in Penn State buildings, especially present and past laboratory areas, mechanical rooms and other areas where mercury may have been used. It contains mercury identification information instructions on what to do if mercury is encountered during work. |
02 82 00 ASBESTOS REMEDIATION
| Document | Version Date | Description |
|---|---|---|
Asbestos Information | July 2005 | This links to a site provided by Penn States Environmental Health and Safety department. It should be referenced by anyone working with building materials at Penn State. It contains an asbestos materials identifications list. It also has asbestos regulations on identifying and handling asbestos. |
02 83 00 LEAD REMEDIATION
| Document | Version Date | Description |
|---|---|---|
| Lead Paint Information | This links to a site provided by Penn States Environmental Health and Safety department. It should be referenced by anyone working with building materials at Penn State. It outlines services offered by Environmental Health and Safety and contains related PSU safety information and policies. It also contains links to related EPA and HUD web sites. |
02 84 16 HANDLING OF LIGHTING BALLAST AND LAMPS CONTAINING PCBs AND MERCURY
| Document | Version Date | Description |
|---|---|---|
| PCB/Florescent Light Ballast Information | March 2002 | This links to a site provided by Penn States Environmental Health and Safety department. It should be referenced by anyone working with building materials at Penn State. This site links to Safety Policy SY26 FLUORESCENT LIGHT BALLAST/CAPACITOR DISPOSAL. Its purpose is to establish a policy and procedure for the handling and disposal of fluorescent light ballasts/capacitors containing polychlorinated biphenyls (PCB's) at all locations of Penn State. |
| Lamp Use & Disposal Information | March 2007 | This links to a site provided by Penn States Environmental Health and Safety department. It should be referenced by anyone working with building materials at Penn State. This site links to Safety Policy SY31 LAMP USE AND DISPOSAL. It contains policy and procedures for the safe handling and proper disposal of potentially hazardous lamps generated at all Penn State University locations (except the Hershey Medical Center) and to mandate the replacement of high mercury content bulbs with low level or non-mercury containing bulbs. |