Versions Compared
compared with
Key
- This line was added.
- This line was removed.
- Formatting was changed.
.01 General
- Ornamental Metal Work (Architectural)
The University prefers that ornamental metal work, if possible, be constructed of anodized aluminum. - Metal Handrails Interior
- Handrails should be aluminum or plastic covered steel.
- Handrails of rectangular cross sections are not acceptable.
- Rails shall be oval or round.
- Rails shall not terminate with open ends. They shall return to wall or in the case of an isolated center rail, it shall return to the post.
- Where rails change direction, the corner shall be made with as large a radius as possible.
- Metal Handrails Exterior
Exterior steps should have railings at open sides and a center railing, if required by applicable code, of bronze or aluminum, not less than two (2) inches in diameter, and securely anchored. - Caps
Where end caps or post caps are required, they should be permanently fastened by welding or with rivets or screws which cannot be easily removed.
Test
| Panel | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||
|
| Include Page | ||||
|---|---|---|---|---|
|